3D PRINTING & SCANNING

There are a set of instruction to follow in order to have it propoly printed.

We started by drawing on paper the design we want and slowly drawing it in Computer Aided Design like AutoCAD,Sketch-Up and Fusion 360. All our drawing must be drawn in 3D in order to be printed.

Here's an example of drawing it in Sketch-up.

After you are done with your 3D design ,you are to exported it into a 3D printing software.

Ultimarker Cura is a software that is compatible with 3D printer in order to be able to print.

After you have exported it ,there are settings to be made like size,support,infill,speed,amount of material and the time of the artifact to be printed.

Here's a look at Ultimarker Cura software.

The First Project i was task to do was to design a keychain of my name on it.

Here's a photo of it.

The Second task i was given was to design and printed something that has Interlocking shapes.

I have design a Cube with a ball trap inside of it as all the interlocking shape with prevent the ball from falling out.

Here's a photo of it.

My final task for 3D Printing was to group with 4 of my classmate to do 4 Different types of 3D printing test.

(Bridging ,Infill Density,Overhang and Clearance)

Bridging (Hafiza)

Infill Density (Lin Chao)

Overhang (Irfan)

Clearance (Terry)